# 1: Introduction to Safety Controller SC10

In this episode, you will learn about various safety devices which can be interfaced to the SC10 safety controller along with a brief introduction to the SC10 controller explaining its terminals and communication interface

{% embed url="<https://youtu.be/CLtnukfn4K0?list=PLTLcz6IpeLYIRAqSmFNkrcWv1iImwkjuK>" %}
Episode 1: Understanding SC10 Controller
{% endembed %}

Various input devices that are used with the SC10 controller are:

* **E-Stop with ISD**
* **RF switch with ISD**
* **Magnetic door switch**
* **Manual reset button (Non-safety input)**


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.codeandcompile.com/factory-automation/safety-controller/banner-sc10-series/1-introduction-to-safety-controller-sc10.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.