# 9: Reading virtual Non-safety inputs via PROFINET Sometimes we do not have a safety device to trigger a safety circuit but instead some parameters (flow level, speed, temperature, etc.) whose critical value should trigger the safety circuit. To interact with these PLC parameters with the SC10 safety controller we transmit the parameter via PROFINET to the SC10 controller as non-safety input Want to see how? Check out this episode to learn more {% embed url="" %} Episode 9: Reading virtual Non-safety inputs via PROFINET {% endembed %} --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://wiki.codeandcompile.com/factory-automation/safety-controller/banner-sc10-series/9-reading-virtual-non-safety-inputs-via-profinet.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.