# 11: Monitoring safety signals on Node-RED Dashboard

It is always amazing to monitor the safety signal in the remote control room.

In this episode, you will see how you can monitor the status of safety input, non-safety input, controller status, and safety relay outputs on the Node-RED dashboard

This has been made possible by interfacing Node-RED with the SC10 controller via MODBUS TCP/IP

{% embed url="<https://youtu.be/TnDevFGLwiU>" %}
Episode 11: Monitoring safety signals on Node-RED Dashboard
{% endembed %}

{% hint style="success" %}
I hope you liked this web series on safety controllers. If you like to watch more of such web series, then [subscribe ](https://www.youtube.com/channel/UCuBdjy8v1OWTkbOZcHmCsqQ)to my channel
{% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.codeandcompile.com/factory-automation/safety-controller/banner-sc10-series/11-monitoring-safety-signals-on-node-red-dashboard.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.